Exenso Sawing System UTG 400-800

The Exenso Sawing System UTG 400-800 series enables flexibility of the cutting range. Depending on the cutting range requirements, the diameter of the corresponding saw blade for the under-table mitre saw can be chosen from 400 to 800 mm. The user-friendly Exenso control system with touch screen enables job lists to be loaded or the manual input of measurements.
The combination of the undertable mitre saw and length stop as a sawing unit enables automated production and allows for increased productivity. Angle corrections are automatically calculated in the Exenso Comfort control system, and due to this optimisation, waste is reduced.

Range of applications Exenso sawing system UTG 400-800

• Cutting of aluminium or plastic profiles with a mitre
• Automatic cutting of 90° sections
• High positioning accuracy
• Individual placing and processing of 6m profiles
• Extension of feed magazine possible

Functions Exenso sawing system UTG 400-800

The saw blade, which comes from below, is automatically positioned at the desired angle. The length stop pushes the profile to the desired measurement and automatically activates the cutting process. Depending on the profile, the angle cutting is carried out completely automatically and the leftover pieces are disposed of. The cutting lists are imported with measurement and angle inputs and called up via the touch screen control system or the barcode scanner.