Combining the undertable mitre saw UTG 300 withthe Exenso Comfort length stop enables effective and fast cutting to length. Due to its high performance, the Exenso Sawing System UTG 300 achieves precise cuts and maximum material yield! The user-friendly Exenso control system with touch screen enables job lists to be loaded or manual input of measurements.
The fast positioning of the profile saw and the electronic stop increase your productivity. Angle corrections are automatically calculated in the Exenso Comfort control system and due to the optimisation, waste is reduced.
The saw blade, which comes from below, is automatically positioned at the desired angle. The length stop pushes the profile to the desired measurement and automatically activates the cutting process. Depending on the profile, the angle cutting is carried out completely automatically and the leftover pieces are disposed of. The cutting lists are imported with measurement and angle inputs and called up via the touch screen control system or the barcode scanner.
| Application |
|
| Suitable materials |
|
| Function / operation |
|
| Pivoting range |
|
| Saw blade diameter | 300 mm |
| Exenso length stop adjustment lenghts | 6,000 mm |
| Positioning |
|
| Model |
|
| Accuracy | ± 0.1 mm |
| Resolution | ± 0.01 mm |
| Clamping system | pneumatic, vertical and / or horizontal |
| Monitor | 15" touch screen with Exenso Comfort operation |
Optimisation of job data when loading via the network and significant reduction of waste. Colour coding for rod change and residual lengths per order enable a quicker overview. In addition, the Exenso optimisation can also be installed in an office workplace for efficient material purchasing and reduction of stock.
Optimisation can be extended to include residue detection. By inputting the residual profile, the residue length is measured and this optimised measurement is then processed.
Software interfaces enable the operator to import fast big numbers of data for cutting aluminium or plastic profiles very efficiently:
Job lists can be called up quickly and conveniently via the barcode scanner. Exenso-FAS enables the automatic positioning and scanning of measurements straight from the label.
For clear identification or allocation, labels can be automatically printed with commission, names or customer logo. Adapted according to your needs as a matter of course!
Should article numbers have different colours so that changes in the article are made visually obvious? The clear assignment of article number and colour helps where there are many different articles on a list, and this results in a reduction in error sources.
Prevents simultaneous occurrence of positioning and sawing.
Feeding can be done semi-automatically or fully automatically, according to the number and type of profiles. For your internal warehouse logistics, we offer the right solution for the supply of tubes and bars, and for their removal, so that it becomes possible to work effectively in confined spaces.
Benefit from
our service.
We will be pleased to give you advise and help
you with our know-how.
Contact us via email or phone.
 | contact formular |
| request product information |
 | +49 (0)7143-8159-0 |